Ram Rebel Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20 Posts
If it's localized to the drivers door, first see if it's just gummed up and sticking. Does the button move smoothly when you cycle it up and down? This usually connects to the same mechanism as the power solenoid.
The power lock is part of the door latch, so you'll need to get at that to troubleshoot.
There should be two terminals at the lock. Applying 12V across them in one direction should unlock the mechanism and switching the polarity should lock it. If that works repeatably, it could be the CAN Bus module in the in the door or the wiring. Check for 12V at the connector to the lock while locking and unlocking with the switch or fob to see if the module is doing it's thing. Either way, you'll need to get in there and troubleshoot.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top